Quantcast
Channel: Integrity Servers topics
Browsing all 625 articles
Browse latest View live

MP Console not responding

Has anyone seen this behavior before, or can anyone offer advice.I had a problem with this server (bl860c blade in c7000 enclosure, using Virtual Connect).     The server has been running without a...

View Article


Unable to connect to the MP console

It used to work but suddenly I can no longer connect. No changes have been made configuration-wise. This is what I get.  11.31 rx8650 and I telnet from another box. I check the config at the MP prompt....

View Article


Installing latest HP Emulex 10/20 GbE Drive on Blade 460c Gen8 withe 2016 TP3

View Article

How to add an option to boot profile?

reconnect -rBroadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)Scsi(Pun2,Lun0) _NEC DVD_RW ND-3540A 1.30 ( 40 MBytes/sec)Scsi(Pun5,Lun0) HP Ultrium 3-SCSI G54D ( 80 MBytes/sec)HP 2Port...

View Article

hpsum: how get out of INSTALL state

I'm trying to use hpsum CLI to downgrade some firmware on a bl870c i2.How do I get my node out of the INSTALL state and UserActionNeeded_phase?(this forum interface really sucks: I can't use ctrl-v to...

View Article


Driver for Ethernet Card on RX2800 i2 server

I am trying to find out what Ethernet Card I have in my Integrity Server RX2800 i2 and also how to upgrade the driver.System runs Open VMS 8.4  

View Article

rx7640 not showing all 4 internal disks

Hi All,im having the following issue with an rx7640 server in fact, i need to install 11iv3 on this newly acquired server however, at early boot stages the server is only showing/detecting 2 internal...

View Article

HP-UX rx2660 - IO Type : MPT Domain Validation IO has timed-out.

Dears,I just noticed an abnormality on one of storges (HP MSA 30) that is connected to a HP rx2660 server via SCSI cables, there were no any amber LED on the storage disks, but strange behaviour.It's...

View Article


HP RX2660 Monitoring

Hi,How can I monitor a HP RX2660 to get CPU Temperature and other ?Normally I have to use the iLO2 MP LAN port, no ? I can't access at 127.0.0.1 (connection refused). If it's possible, I would like to...

View Article


Cannot ssh to iLo

I've to 2 HP server DL380p Gen8 and DL380 Gen9Both can ssh to iLo on DL380p Gen8 but cannot ssh to DL380 Gen9The use is created when boot the server and enter iLo config and the password is correct for...

View Article

Ultrium 6250 LT0-6 tape drive with RX8640

Would a Ultrium 6250 tape drive work with RX8640 Integrity server? It's a LT0-6 http://www8.hp.com/us/en/products/tape-drives-enclosures/product-detail.html?oid=5336456 

View Article

Network booting Integrity RX2620

Is it possible to modify the boot configuration to boot from a network iso image or is DVD and Ignite the only way for for a RX2620 to boot?

View Article

rx2800 i4

HiI acces to my HP_UX rx2800 System Management Homepage, in the Event Viewer tab shows  one Power supply AC lost and the Power supply subsystem redundancy lost. But it isn´t show the "Power supply...

View Article


HPVM guest login issue.

While logging on from the host onto the guest server I get the below error:Host:/=> sudo ssh client Password: PTY allocation request failed on channel 0 When checked on the client syslogs the error...

View Article

ioinit: Instance number 0 already exists for class tape.

we added new SAN switches in our data center and we made zoning from scratch. after the new zoning the server geting the existing tape library with the new hardware paths.server: rx7640.     OS: HP-UX...

View Article


P410i Array Controllers Handling Predictive Failures

I've had the same problem on various servers using P410i array controllers. Replacing drives in predictive failure with known good drives will not clear the predictive failure. The drives are replaced...

View Article

Super dome event

Alert level 2: InformationalKeyword: CACHE_CHECK_INFOIt indicates a cache error occurred and data field contains check info data.Reporting Entity: System Firmware located in cabinet 0, slot 4, cpu...

View Article


SD2 FW 4.1.34 - Firmware bundle is corrupted or not a valid image

Has anyone else got this error message when upgrading a SD2 to fw4.1.34?update firmware usb://d2/hpsd2-4.1.34-fw.bundle allDownloading and unpacking bundleFirmware bundle is corrupted or not a valid...

View Article

Looking for a media Driver

Hello the wider HP World, I am looking for a driver to the following device, HP 652241-B21 - DVDRW Serial SATA JackBlack For ProLiantCan anyone help me please??

View Article

Boot from san on rx7640

Hi,I have a rx7640 with 2 internal drive attach to eva4400 with a qlogic AB379B FC card.  Both mirror internal drive on my rx7640 died.  I would like to install the o/s on the eva, both I don't know...

View Article
Browsing all 625 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>