Boy could I use some help. We have an HP Integrity rx2800 i2 machine (running HP-UX). We also have a T620 iLo. It is my understanding that I can get console access to the Integrity through the iLo. I have not been able to do this. I'm thinking it has something to do with the configuration of the iLo.
The iLo is connected to a monitor, keyboard, and mouse through a KVA. I'm pretty sure I'm on the iLo. I get a Thin Client screen which shows a few icons on it. I double click the one that is labelled rx2800i2 and a terminal type screen shows up. It seems to be label as TeemTalkCE. I would expect this to be the console to the Integrity, however when I press the Enter key nothing happens. I'm thinking I don't have the correct configuration for the serial connection from the iLo to the Integrity. (There is a 9 pin cable running from the |o|o| connector on the back of the iLo to the |o|o| connector on the back of the Integrity.) The bottom of the TeemTalk screen shows Online and VT100. If I go to Settings -> Serial... in the drop down, I see it set up as 9600 baud, 8 Data Bits, No Parity, 1 Stop Bit, No Flow Control, and a Terminal Rate of 9600. I'm guessing these settings are not correct, but I don't really know.
Can anyone help me get access to my console? I would really appreciate it.