Hi,
We have a Integrity BL890c i4 server, with a virtual connect configured, suddenly we have 3 nics down on the hpux 11.31 server, i'm going to use only 1 for the example lan8:
mhv:#/root# nwmgr -S apa | grep lan905
lan905 LAN_MONITOR LB_HS 10 Gbps Full Duplex 1,8*
mhv:#/root# lanscan | grep lan8
2/0/0/3/0/0/0 0x0017A477A004 8 DOWN lan8 snap8 33 ETHER Yes 119
Looking in the OA, this corresponds to port:
FlexFabric Embedded Ethernet
Ethernet FlexNIC (NIC 1) LOM:1-a00:17:A4:77:A0:04 <--
Ethernet FlexNIC LOM:1-b00:17:A4:77:A0:24
Ethernet FlexNIC LOM:1-c00:17:A4:77:A0:44
Ethernet FlexNIC LOM:1-d00:17:A4:77:A0:64
Other pors on the same FlexNIC are up:
mhv:#/root# lanscan | grep A024
2/0/0/3/0/0/2 0x0017A477A024 40 UP lan40 snap40 35 ETHER Yes 119
mhv:#/root# lanscan | grep A044
2/0/0/3/0/0/4 0x0017A477A044 42 UP lan42 snap42 37 ETHER Yes 119
Inside the Virtual Connect there a no error or warning, and the corresponding dowlink port is up, where can I keep looking to fix the problem?.
Thanks.
