I will go to upgrade my HP server firmware, so I read the doc "rx16x0_9_5_install_manual.txt" to get info about that. Although my server is not a corporative server, I use it to my technical and profissional researchs, and the hypothesis to have troubles scare me.
My simple question is: what is the firmware version to consider at the momento of the upgrade?
We can read on the help doc inside the upgrade package:
"This system firmware update will be aborted if the current iLO MP firmware
revision present on the system is less than E.02.29. In order to upgrade
system firmware using this package, first upgrade the iLO MP firmware to
E.02.29. Please follow the upgrade requirements below:
1 - Upgrades to iLO MP firmware revision E.02.29 will require updating to
iLO MP firmware revision E.02.26 first.
2 - iLO MP firmware must be at or upgraded to revision E.02.29 prior to
upgrading to iLO MP revision E.03.30."
My MP "sysrev" output:
SYSREV
Current firmware revisions
MP FW : E.03.15
BMC FW : 03.48
EFI FW : 02.14
System FW : 02.18
I'm ready to install the upgrade? The iLO MP firmware is the first information on the sysrev column?
thanks a lot