Hello I'm on a hp integrity rx7460 ( I know it's a old machin).
My goal is to prepare this server for a customer. I mean installing HP-UX 11 v3, configure auto boot after power failure.
the drama: with my laptop I can access MP via the MP LAN port, But I'm not finding the way to acces the EFI and proceeed to the OS installation.
Is there somebody who can help me? I thought ther was a way to procced to OS installation though the MP.
Please I really need help.
I have a customer who was looking for end of support information for a Proliant server they have. As an example I wanted to show the HP-UX and Integrity end of support matrix I have used over the years. I found a couple of posts and the links were old so here is an updated link using the hpe site. Just an FYI.
http://h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA4-7673ENW&cc=us&lc=en
Hello All!
AM391A - BL890C i4 Npars Enablement kit. Does this mean i canot do vpars on my blade servers?
Thanks
hi there,
recently, I downloaded HPE One View for vmware vCenter (OV4VC) v8.1 and deployed its OVA.
everything at installation goes fine, and also adding vcenter and storages was straight forward.
but, at configuration step, I found out that its plug-in did not add to vcenter.
I have one vcenter 6.5 and one PSC.
no Error occured in no steps..
besides, all vcenter, ESXi servers, PSC and OV4VC have the same NTP configuration.
please help me know how I can add its plugin to vcenter,
thank you.
When I run getsysinfo on Intergrity RX2800 I4 servers, it captures the SFMLOG to a text file. Could the information stored in SFM be old so if the OS is reloaded, a getsysinfo would show old Power Supply Failure Messages, Firmware update failure Messages, etc?
I am trying to change the value "VG Max Size" from 1t to 3t on lvm version 2.0 via the vgmodify command, but this command is not longer supported in version 2.0. With what command can I can the "VG Max Size" value for lvm version 2.0 , I am using 11.3i hpux version.
Thanks and Regards
The error I get is:
Error: This command is not supported on volume group version 2.0.
Been a while since I installed server firmware. What is the current best practice for updating firmware on a rx2800 i4?
Do I use SUM or put the FW on a memory stick and plug it into the server. Would be nice to be able to update firmware remotely as I have servers all over the world.
Looking forward to the wisdom.
- Burk
It used to work but suddenly I can no longer connect. No changes have been made configuration-wise. This is what I get. 11.31 rx8650 and I telnet from another box. I check the config at the MP prompt.
is this a network issue? Which directly do I dig in?
MP:CM> LC -nc
telnet xx.xx.xx.xx
Trying...
telnet: Unable to connect to remote host: Connection timed out
Hi, i'm trying to install OS through a network interface. also i'm launching console and mounting the shape. Then i'm doing all steps, but finally i see the message "ReferenceError:Land is not defined busy.htm:343"
Installation was tested on different images of systems.
Maybe somebody faced with the problem and can help?
It used to work but suddenly I can no longer connect. No changes have been made configuration-wise. This is what I get. 11.31 rx8650 and I telnet from another box. I check the config at the MP prompt.
is this a network issue? Which directly do I dig in?
MP:CM> LC -nc
telnet xx.xx.xx.xx
Trying...
telnet: Unable to connect to remote host: Connection timed out
Hi,
A customer wants to replace their existing RX6600 servers with new ones that are just slightly higher. They would then keep the old ones for the DR site.
What is a recommended upgrade path from HP Integrity RX6600 server?
Please advice.
Berenger
Will HPE DL180 Gen9 e5-2620v4 lff in svr/prom - 860944-375 support HDD type : HPE INTERNAL P/N: 858594-B21 - 1TB 7.2K SATA 3.5 SC STND HDD?? Kindly advice.. and also please let us know the difference in Midline HDD and Standard HDD. Which will be compatible?
Hello...
I am having trouble with downloading the MC990X firmware , The support site keeps pushing me to
the Warranties and Licensing website and then requesting a SAID. Well there is No SAID associated with the
firmware yet, Any ideas. I am trying to escalate this as well .
Good afternoon!
Our rx2660 server's firmware revision is too old - we would like to upgrade it. I know we must have a support contract with HP for downloading patches and firmwares. Do I need a Hardware or Software support contract for this? We are ready to buy the software support (with return-to-support) because we need the newest HPUX 11iv3 operating system, but someone has told me that I can get the server's firmware only if I have the hardware support too.
In the past the firmwares were available by patches - did this change? If I can download firmwares by patches then it will be enough to order the software suppot. Am I right?
Thanks for your help in advance,
Knd regards,
Laszlo
Hello ,
I have been trying to make my emulex hba work in my integrity box. I have tried firmware and drive update , but it still appears as unknown device.
my machine is rx 2800i2 and HPUX release is B.11.31.1009 and emulex card is AH403A 8gb
Thanks,
Deepak
Confirm me the part compatiable
AH395-69001 instead of AH395-60001.
Hi,
This is probably a lost cause disk issue but I may be lucky and someone in this forum might tell me otherwise
RX7620 has two internal disks on vg00. Root disk is fine, the disk with /opt is not fine
ioscan reports all ok c0t6d0 c3t6d0 both CLAIMED, c3t6 has the problem though as reported by lvm
LVM : Failure in attaching PV (64000/0xfa00/0x2) to the root volume group.
reconnect -r says not ok
Scsi(Pun6,Lun0) HP 146 GST3146707LC HPC1 (160 MBytes/sec)
Scsi(Pun2,Lun0) _NEC DVD_RW ND-3550A 1.31
Scsi(Pun6,Lun0) HP 146 GST3146707LC HPC1ERROR: Cannot determine device capacity
Scsi(Pun6,Lun0) HP 146 GST3146707LC HPC1
diskinfo /dev/dsk/c3t6d0 shows device busy ( presumably as it's part of the VG and lvm is retrying)
At the EFI level I think I am only seeing one disk
Shell> devtree
Device Tree
Ctrl[7F] LSI Logic Ultra160 SCSI Controller
Ctrl[81] HP 146 GST3146707LC HPC1
Ctrl[82] FAT File System [FAT32] 499 MB
Ctrl[83] Acpi(HWP0002,100)/Pci(3|0)/Scsi(Pun6,Lun0)/HD(Part2,SigA4A58C02-0812-11DE-8000-D6217B60E588)
Ctrl[84] FAT File System [FAT32] 400 MB
Ctrl[80] LSI Logic Ultra160 SCSI Controller
Ctrl[85] _NEC DVD_RW ND-3550A 1.31
Ctrl[09] Acpi(HWP0002,11C)
Ctrl[86] Acpi(HWP0002,11C)/Pci(1|0)
Ctrl[87] LSI Logic Ultra160 SCSI Controller
Ctrl[88] LSI Logic Ultra160 SCSI Controller
<truncated>
I've tried reseating but getting to the end of things to try. In case it's just the disk label that's missing is there a way to get this back?
Thanks
Paul
Dear TEam,
I have hp ux server with OS version 11.30 running on BL860ci4
I need to upgrade thre lan firmware from4.2.401.2212 to 4.9.416.12.
Kindly let me know how i can perform this activity.
Regards
RKJ
cc command failed with:
Sorry, command failed: RtnCodeIoBayNotAttachedToCell
io command shows no io chassis connected to any cell:
[mp0013217c7543] MP:CM> io
--------------------------+
Cabinet | 0 | 1 |
--------+--------+--------+
Slot |01234567|01234567|
--------+--------+--------+
Cell |XXX.....|........|
IO Cab |........|........|
IO Bay |........|........|
IO Chas |........|........|
Following is the ps> cabinet 0 output:
[mp0013217c7543] MP:CM> ps
This command displays detailed power and hardware configuration status.
The following MP bus devices were found:
+----+-----+-----------+----------------+
|Cab.| | UGUY | Cells |
| # | MP | CLU | PM |0 1 2 3 4 5 6 7 |
+----+-----+-----+-----+----------------+
| 0 | * | * | * |* * * |
You may display detailed power and hardware status for the following items:
B - Cabinet (UGUY)
C - Cell
M - MP
Select Device: b
Enter cabinet number: 0
HW status for SD32B compute cabinet #0: FAILURE DETECTED
Power switch: on; Power: enabled, good; Door: open
Fan speed: normal; Temperature state: 29 C, normal
FANS OR BLOWERS NOT REDUNDANT; BPSs redundant; Clocks UNDEFINED;
+------+--------+-----------------+---------------------+
| | Main BP| | IO Backplanes |
| | Power | | IO Bay 0 | IO Bay 1 |
| Main | Boards | Cells | Chassis | Chassis |
| BP | 0 1 | 0 1 2 3 4 5 6 7 | 0 1 2 3 | 0 1 2 3 |
+---------------+------+--------+-----------------+----------+----------+
| Populated | * | | * * * | * * | * |
| Power Enabled | * | | * * * | * * | * |
| Powered On | | | | | |
| Power Fault | | | | | |
| Attention LED | | | | | |
+-------------+---------+-----------+
| | Cabinet | IO |
| BPS | Blowers | Fans |
| 0 1 2 3 4 5 | 0 1 2 3 | 0 1 2 3 4 |
+-----------+-------------+---------+-----------+
| Populated | * * * * * | * * * | * * * * * |
| Failed | | | |
Please type <CR> to continue, Q to quit, or S to stream:
Voltage margin: nominal; Clock margin: nominal
+-------------------------------------------+
| Backplane Power Converter Faults |
| | VRM Slot | |
| 12V | 3.3V HKP | 3.3V | 1 2 3 4 5 6 | LED |
+-----+-----+----------+------+-------------+-----+
| PS0 | | | | | |
| PS1 | | | | | |
LED states: G - on green (no faults)
YB - blinking yellow (fault detected)
+------------------------------------------+
| Backplane Power Faults |
| | | | 2.5V |
| 1.2V | 2.5V | | |00 40 01 41 02 42|
+-------+------+------+ +-----+-----------------+
| RPM0 | | | | XBC | |
| RPM1 | | |
| RPM2 | | |
| OSP | | |
Please type <CR> to continue, Q to quit, or S to stream:
CLU Status PM Status CLU POST
UGUY LEDs: **______ **** ____
+---------------------------------------------------------------------------+
| IO Backplane Power Fault & Temp Status |
| Physical | |
| Location |Type | Revision |+12V |-12V |+1.5V| +5.0V | +3.3V |LED|
|Cab#/Bay#/Slot#| | | 0 1 | 0 1 | 0 1 | 0 1 2 | 0 1 2 3 | |
+---------------+-----+-------------+-----+-----+-----+-------+---------+---+
| 0/0/1 | i | 000.000.000 | | | | | | |
| 0/0/3 | i | 000.000.000 | | | | | | |
| 0/1/3 | i | 000.000.000 | | | | | | |
+---------------+-----+-------------+-----+-----+-----+-------+---------+---+
Key: . - Present; * - Powered; F - Faulted; T - Overtemp
LED states: G - Green on (no faults)
Y - Yellow on (redundant fault detected)
YB - Yellow blinking (non-redundant fault detected)
IO Backplane types: i - PCI-X IO Backplane (IO LPM type is IO_LPM)
e - PCI Express IO Backplane (IO LPM type is IO_LPM_E)
Following is the ps> cell 0 output:
[mp0013217c7543] MP:CM> ps
This command displays detailed power and hardware configuration status.
The following MP bus devices were found:
+----+-----+-----------+----------------+
|Cab.| | UGUY | Cells |
| # | MP | CLU | PM |0 1 2 3 4 5 6 7 |
+----+-----+-----+-----+----------------+
| 0 | * | * | * |* * * |
You may display detailed power and hardware status for the following items:
B - Cabinet (UGUY)
C - Cell
M - MP
Select Device: c
Enter cabinet number: 0
Enter slot number: 0
HW status for Cell 0 in cabinet 0: FAILURE DETECTED
Cell power status: enabled, OFF, no fault, NVRAM battery LOW
Boot is blocked
PDH shared memory is not-initialized
Cell DISABLED by PDHC: bad CPU module FRUID checksum
Cell Complex Compatibility: B
Cell Partition Compatibility: .
CPU Compatibility: .
Cell Attention LED is off
PDH status LEDs: ____
Core cell is INVALID
IO cable status: IO IN AND OUT CABLES STATUS UNDEFINED
IO cable connection physical location: cabinet 0, IO bay 0, IO chassis 0
+-----------------------------+ +--------------------------------------------+
| CPU Modules | | DIMM Presence |
|Populated| Faulted | Enabled | | Side: | A | B |
| 0 1 2 3 | 0 1 2 3 | 0 1 2 3 | | Echelon: |0123456789ABCDEF|0123456789ABCDEF|
+---------+---------+---------+ +----------+----------------+----------------+
| | | | | |* | |
Please type <CR> to continue, Q to quit, or S to stream:
+-------------------------+
| PDH Power Module Faults |
| 1.2V PDH | 2.5V PDH |
+------------+------------+
| * | * |
+-------------------------------------------------------------------------+
| Cell Board Power Module Faults |
| 1.5V SKY | 1.2V FSB | 2.5V L2C | 3.3V HKP | MISC LDO |
| 0 1 2 | 0 1 2 | 0 1 | 0 1 | 0 1 2 3 4 5 6 7 8 9 a b c d |
+----------+----------+----------+----------+-----------------------------+
| | | | | * * |
+----------------------------------------------------------+
| Cell Power Board Power Module Faults |
| 1.8V MEM | 1.8V AB-IO | 1.5V AB-CORE | 12V IF | 3.9V IF |
| 0 1 2 3 4 | 0 1 | 0 1 | 0 1 | 0 1 |
+-----------+------------+--------------+--------+---------+
| | | | | |